ICAP client on R80.20 and 3rd DLP Server Symantec

[Alessandro_Marr]

Hello  all, anyone could share a configuration example about using R80.20 as a client ICAP for a Web Prevent Symantec DLP Server?

when I Trying the gateway doesn´t understand a message to block came from DLP server.

Thanks.

Regards.

[PhoneBoy]

I believe our initial support around ICAP was developed specifically for Symantec DLP.
It would help to understand what steps you've taken to configure it.

[Alessandro_Marr]

Hello Dameon, do you have a configuration (example) to share? I have a DLP server Symantec WEB Prevent version 15.x,  SMS R80.20 M2 and two gateways r80.20 take 33 using Cluster high availability,

When my DLP server respond an ICAP request message from my gateway (in REQMOD) the body message came with a html format explain the block ocurred and my gateway does not show the page. I tried change the parameter to show block message or not show block message... but didn´t work.

**parameter user_check_interaction_name is correct.

 # vi icap_client_blade_configuration.C

(
:enabled ("true")
:filter_http_method (
: (
:method ("POST")
)
)
:http_services (
: (
😛ort (8080)
)
)
:inspect_html_response ("true")
:user_check_interaction_name ("Bloqueio de Aplicativo")
:trickling_mode (0)
:log_level (1)
:icap_servers (
: (
:name ("DLP_Symantec")
:ip ("10.100.1.190")
:ip6 ("")
😛ort (1344)
:service ("reqmod")
😛roto ("icap")
:modification_mode ("reqmod")
:transp ("3rd_cpas")
:failmode (open)
:timeout (61)
:max_conns (100)
:user_check_action (2)
:x_headers (
:x_client_ip ("true")
:x_server_ip ("true")
:x_authenticated_user ("true")
:authentication_source ("Local")
😛ase64_username_encode ("true")
)
)
)
:rules_type ("include")
:network_filter_rules_ip4 (
: (
:src_ip_ranges (
: (
:min_ip ("10.100.41.105")
:max_ip ("10.100.41.106")
)
)
:dst_ip_ranges (
: (
:min_ip ("any")
:max_ip ("any")
)
)
)
)
:network_filter_rules_ip6 (
: (
:src_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
:dst_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
)
)
)

Thanks 

[PhoneBoy]

I don't have sample configurations, I just know from prior conversations with R&D where previous versions of this feature came from 🙂
I recommend engaging with the TAC on this as I do see a couple support tickets on this (but on earlier releases).

[Alessandro_Marr]

ok, thank you.

[HeikoAnkenbrand]

Hi @Alessandro_Marr 

ask @Thomas Werner 

He is an expert in TE and ICAP questions.

[HeikoAnkenbrand]

Or see SK111305:

Check Point support for Internet Content Adaptation Protocol (ICAP) client with data modification

[Aleksandr88]

did u succeed in setting up successfully?

[Alessandro_Marr]

yes, using r80.20 take 74