Check Point R80.30 Cluster load sharing with IPSec VPN enable

[Support_Team_Bi]

I want to know when Cluster load sharing with IPSec VPN enable can use in version R80.30 

[PhoneBoy]

Follow the steps in this SK: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut... 
For background on the issue, see: https://community.checkpoint.com/t5/General-Topics/When-will-checkpoint-support-the-Load-Sharing-mod...

[Support_Team_Bi]

PhoneBoy,

Thank you, but I see important "ClusterXL in Load Sharing mode is not supported with IPSec VPN blade enabled" please confirm that can work with IPSec ?

[PhoneBoy]

The steps above are needed to enable Load Sharing on R80.20+.
I had forgotten that Load Sharing VPN was still a limitation with the details why not explained in the thread linked previously.
It is something we plan to add back in a future release (checking on the current ETA).
I would also engage with your local Check Point office around this requirement. 

[PhoneBoy · Accepted solution]

Hi, just to update, it looks like there is a customer release that enables Load Sharing + VPN for R80.40.
This is currently targeted to be added to maintrain in an upcoming release (not R81). 
Please engage with your local Check Point office to obtain this release.

[Support_Team_Bi]

In R80.30 can enable in the future hotfix right ?  

[PhoneBoy · Accepted solution]

As far as I know, it’s not planned for a R80.30 JHF.
You should work with your local Check Point office on this requirement.