- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
hello i'm trying to see where my checkpoint is connected (which physical port)
the physical port is eth 2 on the checkpoint
is there a command similar to "show cdp" in checkpoint CLI ?
Sort of. From the third edition of my book:
Determining the Layer 2 switching path is a little more difficult and may involve
tracing cables. If you are using Cisco switches in your network, from the firewall you
can sniff and decode Cisco Discovery Protocol (CDP) frames from the switch attached to
the firewall with this command:
tcpdump -vn -s 1500 -i (interface) 'ether[20:2] == 0x2000'
Figure 1-6: tcpdump Decode of CDP Traffic
From your testing workstation, you can do something similar in Wireshark. Start a
capture on your network interface and use the following filter:
eth.dst == 01:00:0c:cc:cc:cc
Figure 1-7: Wireshark Decode of CDP Traffic
The CDP traffic should tell you enough about the locally attached switch to identify
it. Keep in mind that there may be many other switches in the path between your testing
workstation and the firewall depending upon the architecture of your network; you need
to discover them all. If they are Cisco switches and you can obtain command-line access
to them, running the Cisco IOS command show cdp neighbors is helpful for
identifying adjacent switches.
Depending on the vendor (and version) of the networking devices used in your
environment, they may be using the IEEE 802.1AB Link Layer Discovery Protocol
(LLDP) instead of CDP. The Cisco command show lldp neighbors is helpful for
identifying adjacent switches; use this command to view and decode LLDP traffic:
tcpdump -vn -s 1500 -i (interface) ether proto 0x88cc
This looks like another great candidate for @HeikoAnkenbrand or @Danny to turn into oneliner 🙂
Cisco Discover Protocol is not supported with Check Point.
There is self-written CDP deamon for Check Point. Works like a charm.
https://github.com/oribit/cdpd-cp
What about LLDP?
Only in R81 and above per sk117676, note the limitations about VSX.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 28 | |
| 8 | |
| 7 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 4 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION