- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Hi,
Has anyone tried to multihome a VIP in clusterXL? It would be temporary. We're moving a DMZ network from one firewall to another, otherwise have to change default routes & reboot 20 linux servers.
You mean use multiple subnets on the same physical interface with ClusterXL?
Pretty sure this is NOT supported.
Same subnet different IPs
The current VIP is 192.168.10.22 and I want it to also listen on 192.168.10.26 temporarily.
Pretty sure that's not supported either (multiple VIPs on the same subnet).
That said, you could probably get the same effect by setting up a static ARP for .26 to give the same MAC as .22, so the packets are received by the relevant gateway.
Maybe we will try that. I guess even if it doesn't survive a reboot, I could add it back. Also, you'd only be able to put that on one of the cluster members I assume, so that may be a complication.
As long as you don't need the cluster to send traffic from the VIP, you can just add a proxy ARP statement for it. Be sure to add it on both members. That will cause the active member to reply to ARP requests for the IP in question using the same mechanism which causes the active member to reply to ARP requests for the VIP. As long as ARP gets the traffic to the member, you should be fine.
Proxy ARP entries in clish survive reboot as long as you run 'save config'.
eth2 .25 cluster member A
eth2 .24 cluster member B
.26 is the new VIP and .22 is the IP on the old hardware.
So, just to be clear I could add a proxy ARP for .22 in the web ui on each member.
IPv4 Address 192.168.10.22
Interface name eth2 or I can choose MAC and use the same MAC on the respective cluster member.
Real IP on member A will be 192.168.10.25, .24 on B
I would add it on the command line, but yes. That's fundamentally how the inbound leg of a ClusterXL VIP works in the first place.
As long as you don't need to negotiate dynamic routing with both IPs, it will work.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 28 | |
| 8 | |
| 5 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 4 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION