- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
I am seeing in multiple installations periodic failure of the updates. Most frequent ones are the AB/AV with the message stating that the contract verification has failed due to connectivity issues. As a rule, it resolves by itself in a few hours.
However, until it resolved, we have a big fat red "X" in the status of the gateways and servers.
So my questions are:
1. Why is this such a persistent problem?
2. Why can't the grace period be extended on transient notifications and the Status for them be indicated by, for example, a yellow "Warning" rather than red "Failure"?
Regards,
Vladimir
I am presently staging an environment with 10 gateways. Now an then one of those complains about the issues described above, but few hours later Status changing to "All is well".
Needless to say, those are configured identically and should there be any configuration issues, those would've been consistent.
I've seen the same behavior in at least three other environments and , because of the transient nature of these errors, I am inclined to suspect CP's services availability.
As to the notification icon in the status monitor, it would go a long way to assure clients that it is not an imminent problem requiring immediate attention and efforts.
We saw this behaviour on all of our customers gateways and ends up in a lot of trouble. Admins calling in and states there are problems with the gateways because they see a red X. As Vladimir wrote, that's not a real problem but brings a lot of discussions. Most of the times the problem is gone after 2-3 hours. And sometmes SmartMonitor isn't updated, you have to close the GUI and restart to get the actual state.
This is a very confusing problem, should be solved quickly.
We are used to see "Applications update failed" often. When talking with others about this problem they just say, wait and it will be fixed by itself. Everyone just accept that it happens.
I see this also, occasionally. It always goes away and most of the time it's Anti-Virus/Anti-Bot. Today it's just Anti-Bot and on one gateway. When I check into it, I can reach the URL's from the gateways. Very odd, but I seem to remember another thread on this issue I believe.
Gentlemen,
Please "Kudo" the original post if you would like to get Check Point's attention on this subject.
I am not asking this for self-promotion, but for all of us to actually benefit from this forum instead of just venting our frustration.
Thank you,
Vladimir
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 30 | |
| 8 | |
| 7 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 3 | |
| 3 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaThu 26 Nov 2026 @ 10:00 AM (CET)
The Cloud Architects Series: Cloud Security State in 2026 – Lessons Learned and a Look AheadWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION