- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Hi,
I'm about to move a Checkpoint 15k cluster from the current 1Gb interfaces to new 10Gb interfaces.
There are clans created on the 1Gb interfaces and I have to remove those and create the same vlan interfaces on the new 10Gb interfaces.
Have anyone done this before?
What steps are included in this change?
Easiest is this way, there will be a minor glitch on failover nr 1:
Good luck and be aware to plan this in a maintenance window, easier to tell everyone this will caus 15 minutes downtime and be done in 1 minute than the other way around.
Or a quick and dirty hack:
1) Change the PCI bus ID's and the interfaces in the following file
/etc/udev/rules.d/00-OS-XX.rules
Now replace the 1 GB Interfaces with the 10 GB Interfaces.
2) Reboot the appliance
Attention!
You make sure that the file is adjusted during the next update for example from R77.30 to R80.20.
Easiest is this way, there will be a minor glitch on failover nr 1:
Good luck and be aware to plan this in a maintenance window, easier to tell everyone this will caus 15 minutes downtime and be done in 1 minute than the other way around.
That is awesome!
A big thanks to you 🙂
Or a quick and dirty hack:
1) Change the PCI bus ID's and the interfaces in the following file
/etc/udev/rules.d/00-OS-XX.rules
Now replace the 1 GB Interfaces with the 10 GB Interfaces.
2) Reboot the appliance
Attention!
You make sure that the file is adjusted during the next update for example from R77.30 to R80.20.
Please note that performance tuning is necessary for a 10 GBit/s interface.
For example multi-queueing and other tuning options.
More see here:
R80.x Performance Tuning Tip – Multi Queue
Regards
Heiko
Thanks for your answer!
So you mean that after switching interfaces I need to tune GAIA for 10Gb?
We're currently on R77.30 but we're soon going to upgrade to R80.20.
Sorry for bringing up the old thread. First of all, how was the migration?
I wanted to clarify why would you expect a dip in connections? Is clusterXL should not handle such situation?
Is a very simple solution to edit the file:
/etc/udev/rules.d/00-OS-XX.rules
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 30 | |
| 8 | |
| 7 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 4 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION