- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Is anyone using Check Point R77.30 ClusterXL and Cisco GLBP? Our MPLS provider has configured gateway load balancing protocol between two 50Mbit circuits. We are using the VIP of these routers as our route for the MPLS network. We were told that they are seeing traffic only being utilised outbound on one circuit. I've read this post which describes my scenario pretty much, however there isn't a solution, has anyone else come across this?
Any help appreciated!
(I cross posted this in to "Check Point Experts" on linked in - Apologies)
How many routes are configured for this destination on the Check Point devices?
Just one route. All global sites have their own /29 transfer network within the /24 super net.
I would assume the forwarding decision is "upstream" then and not something the Check Point can directly influence.
Is the traffic going to the MPLS circuit subject to NAT?
In my experience HSRP and VRRP all uses a VIP and all the "magic" is handled upstream yes.
The service provider engineer told me that the MAC address is alternated for the VIP that is provided by the GLBP cluster and this is how the load balancing is performed.
I guess the difference here is that we have active / active.
His last comments were:
Your device should be capable to do Load-Sharing and accept two MACs for one IP, please check this.
Some ideas:
I replied with:
Maybe someone has specific experience in this scenario and could correct my logic above?
Thanks so far!
I'm not sure how allowing asymmetric flows would necessarily solve this since the problem appears to be the fact we're sending traffic to one of the two MAC addresses.
Even so, asymmetric flows are bad from a firewall perspective.
You may be able to use ECMP (Equal Cost Multipath) to your advantage here.
Configure a static ARP with some other IP on that subnet as a second route.
Configure the "real" IP and this other IP as nexthops using ECMP.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 28 | |
| 8 | |
| 5 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 4 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION