- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Hi Guys,
I am struggling to configure bridge mode in my VS with active/standby clusterXL. In my understanding, if you are running bridge mode, you need to have bridge interface however, when I tried to create a new VS, it asked me to tag the VLAN and asked what is the external and internal interfaces.
So I created a bridge interfaces beforehand I enabled the VSX feature and created the bridge ID in the smart console as shown below,
br1 = eth1 and eth2
br2 = eth3 and eth4
In the smart console, I created a new VS and associate br1.x (x = VLAN ID). Is this the correct way to configure the bridge mode in VSX? Also, how can you determine the external and internal if you only have now br interface?
Thank you.
Hi @PhoneBoy,
so I created the "br1" and "br2" in GAIA however, when I configure the VS in SmartConsole, it ask me for a VLAN. Do I need to put the VLAN per "br" interface? For example, br1.20 then br1.30?
Another way that I tried it to setup everything in Smart Console which includes the VS in bridge mode then I configured the following interfaces,
eth1.X and eth2.X
eth1.Y and eth2.Y
eth1.Z and eth2.Z
Then, Smart Conole successfully pushed down the config and policy to the VS then when I checked the CLI of the gateway, it created automatically the bridge interfaces.
Is this correct also?
Thanks
Thank you so much @PhoneBoy, it is such a bit tricky to configure VS in bridge mode compare to a non-VS gateway.
Hi @Maarten_Sjouw ,
Thanks for the feedback. But if I did not tick the TRUNK box, does it means that the bridge interfaces will not act as a trunk? My target is to make my bridge interfaces as trunk so that whatever VLANs configured in the switches, it can pass through the VS.
Also, the other way that I tried is to configure my VS as bridge mode then I configured in Smart Console the eth1.X and eth2.X then eth1.Y and eth2.Y. The when I checked the CLI, it automatically configured bridge interfaces.
Thank you so much.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 30 | |
| 8 | |
| 7 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 3 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaThu 26 Nov 2026 @ 10:00 AM (CET)
The Cloud Architects Series: Cloud Security State in 2026 – Lessons Learned and a Look AheadWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION