Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

CPview and Top-connections in R80.20

Jump to solution

Hi,

We recently upgraded from 80.10 to 80.20 and noticed that BW Top-Connections view has been removed from Cpview. There is only top-connections information in regards to CPU utilization.

Where can we quickly get BW top-connections info in R80.20 from cli?

Regards,

Marek

Labels (2)
1 Solution

Accepted Solutions
Highlighted
Admin
Admin

Just to update this thread: we've added this back to R80.40 JHF 69 and above.
Believe it will also be added to future R80.30 and R80.20 JHF releases. 

View solution in original post

12 Replies
Highlighted
Employee
Employee

Hey Marek

I'm Adam from diagnostics (Owners of CPView)

Top-Connections by network was indeed removed on R80.20 due to change in GW architecture

We're working on adding it back

But I'm pretty sure you can view that and more from SmartConsole

Thanks

Highlighted
Iron

Hi Adam,

 

Is this still in the works? Any ETA?

What workaround(s) exist to get this functionality back any other way?

 

Thanks,

Highlighted
Admin
Admin
Highlighted

 will this command be appropriated to provide similar output as CPVIEW?

 

For RX traffic:

rtm monitor -f interface  interface,in -k src -v ab -k dst -k svc

 

For TX traffic:

rtm monitor -f interface Interface,in -k src -v ab -k dst -k svc

 

Both directions

rtm monitor -f interface  interface,both -k src -v ab -k dst -k svc

Highlighted

Will it be back with r80.30 or with some jfa take? Without Monitoring blade license we cannot monitor it and previously it was easily visible in CPView..

Highlighted
Copper
packet size was also removed .
Will it be added back too?
Highlighted
Will this be added back soon please ?
0 Kudos
Highlighted
Admin
Admin

Just to update on this, it looks like we are planning to add this back into an R80.40 Jumbo in the near future.
This will be backported to R80.20/R80.30 jumbos as well.

0 Kudos
Highlighted
Platinum

Why there is no support for IPv6 in CPview ?

Kind regards,
Jozko Mrkvicka
0 Kudos
Highlighted
Admin
Admin
Not sure what the plan is for adding IPv6 support in cpview.
0 Kudos
Highlighted
Iron

Hi Phoneboy, and Adam,

 

Been two months since the last update. R80.40 Jumbo came out in March and doesn't have this fix.

 

Is there an ETA on a version with Top-connections back?

 

Also, in SmartView you get some weird results with source column resolving an IP or something to a weird string of characters that is definitely not a PTR lookup. Is there a way to turn off name resolution for SmartView so we can see the source IP?

Highlighted
Admin
Admin

Just to update this thread: we've added this back to R80.40 JHF 69 and above.
Believe it will also be added to future R80.30 and R80.20 JHF releases. 

View solution in original post