Skip navigation
All Places > General Product Topics

SMB and SMP

Log in to follow, share, and participate in this community.

Recent Activity

Jeroen Demets
Hi, we have several sites where we can not get a decent internet connection. We are using a 4G router for those locations and have put 600 or 700 series appliances behind it. They get a dynamic IP so we are using a VPN community with certificates for these DAIP gateways.   VPN tunnels get built and everything works but we notice the lines are… (Show more)
in SMB and SMP
Hristo Grigorov
Ok, this happens to me almost every time I open SR. I always explicitly state in the SR it is SMB appliance, exact model  "1470 wired", firmware revision and so on. And every time it will go like this:   1. TAC will send me reply that R77.20 is no longer supported and I shall upgrade to at least R77.30   2. TAC will ask me for bunch of log files… (Show more)
in SMB and SMP
Stephan Kremer
Hi,   I established a site-to-site VPN between a 600 appliance and an old UTM-1 edge. Both devices support IPSEC compression related to their datasheets, but the tunnel is established without.  I find no options at all to check this. Any help is welcome.   Best regards,   Stephan
in SMB and SMP
Günther W. Albrecht
It is very hard to keep up with documentation and SKs while all is constantly changing. I have collected material and present it here completely. Please be aware that Check Point will remove, change or replace SKs at any time, so it can well be that many listed documents already do not exist anymore…   skI1915     Configuring Dynamic Objects…
in SMB and SMP
Santosh Pandey
Hi,  we have a 750 device with three internet connection on load sharing mode. Two of the three internet act as default route and one is not used as default route as i have cleared route traffic through this connection in properties. i have created a static route for a host with points to the internet connection not participating in load sharing.… (Show more)
in SMB and SMP
Hristo Grigorov
Hi,   has any of you ran into something like this:   [cpWatchDog 2765 1744478736]@RD6281[18 May  9:20:47] [ERROR] Process SFWD terminated abnormally : Unhandled signal 11 (SIGSEGV). Core dumped. [cpWatchDog 2765 1744478736]@RD6281[18 May  9:21:47] [SUCCESS] SFWD started successfully (pid=3551) [cpWatchDog 2765 1744478736]@RD6281[18 May  9:35:25]… (Show more)
in SMB and SMP
Sebastian Wagner
I have a two ISP connected to a 1490 gateway. Is there a chance to configure sk25152 on SMB gateway? I already tried it like described but did not work.
in SMB and SMP
Robinson Oliveira
Hi team, I’d like to check if anyone know if 1400 with Centralized Manager support the follow features. 4 questions: 1 - Geo location Policy, to allow traffic of certain countries to be blocked; 2 – Visibility in logs of countries that contain the origin and destination in the access logs; 3 - Support Jumbo Frames; 4 - Support multiple user… (Show more)
in SMB and SMP
b0615162-b643-440d-a5f5-5160f743405a
Hi,   I want to limit the bandwidth per IP, It means each IP from LAN to WAN will not exceed 5MB of bandwidth (download & upload), Someone knows how to do it in Check Point 750 (Version: R77.20.75)?
in SMB and SMP
Jerry Eblin
We are having an issue with finding a USB 4G/LTE modem for the 1400 series of appliances with Verizon as the provider. We have reached out to Verizon, our local SE, and now the community. It seems that all the models listed in the SK article are older devices which Verizon no longer sells. They provided us with a newer version and Check Point… (Show more)
in SMB and SMP
Load more items