- Products
- Learn
- Local User Groups
- Partners
- More
Maestro Masters
Round Table session with Maestro experts
hello evry one i want to upgrade dual chassis 41000 run actualy R76SP.30 to R76SP.50 because R76SP.30 is end of life .
my output :
[Global] FW-VSX-ch01-01:0:ACTIVE > asg stat -v
--------------------------------------------------------------------------------
| VSX System Status - 41000 |
--------------------------------------------------------------------------------
| Chassis Mode | Primary Up (Chassis 1) |
| Up time | 273 days, 11:21:48 hours |
| SGMs | 2 / 2 |
| Virtual Systems | 9 |
| Version | R76SP.30 (Build Number 47) |
--------------------------------------------------------------------------------
| VS ID: 0 VS Name: FW-VSX |
--------------------------------------------------------------------------------
| Chassis 1 ACTIVE |
--------------------------------------------------------------------------------
| SGM ID State Process FW Policy Date |
| 1 (local) UP Enforcing Security 13Sep18 15:25 |
--------------------------------------------------------------------------------
| Chassis 2 STANDBY |
--------------------------------------------------------------------------------
[Expert@FW-VSX-ch01-01:0:ACTIVE]# cphaprob state
--------------------------------------------------------------------------------
| VS ID: 0 VS Name: FW-MAI-FRPAR-CHA-DCH-03-P |
--------------------------------------------------------------------------------
| Chassis 1 |
--------------------------------------------------------------------------------
| SGM ID State Process FW Policy Date |
| 1 (local) ACTIVE |
--------------------------------------------------------------------------------
| Chassis 2 |
--------------------------------------------------------------------------------
| SGM ID State Process FW Policy Date |
| 1 ACTIVE |
--------------------------------------------------------------------------------
[Expert@FW-VSX-ch01-01:0:ACTIVE]#
as i see on checkpoint documentation the upgrade will be done directly from the chassis. My question is the vsx and vs are managed by server management . could you please tel me if there is a required action from the server management after the upgrade from the chassis.
Best regards
As the major version from the Check Point Security Management point of view is the same, you shouldn't need to do anything there.
As the major version from the Check Point Security Management point of view is the same, you shouldn't need to do anything there.
Think you very much for you help : could you tell me a bout downgrade from R76SP.50 to R76SP.30 .
it is mandatory to upgrade Firmware for the chassis after upgrade also .
best regards
Downgrade should be done via rollback to pre-upgrade snapshot. There is no change on the mgmt side.
If you are referring to SSM firmware, keeping this to the latest version (regardless of software version) is always a good idea.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
User | Count |
---|---|
24 | |
4 | |
4 | |
2 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 |
About CheckMates
Learn Check Point
Advanced Learning
YOU DESERVE THE BEST SECURITY