Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Crzcarlo
Participant
Jump to solution

/tmp/log/local almost full in 1590 device

Hi everyone


I am working on a inherited Check Point structure with sever models and firmwares. By monitoring them, I notices that a 1590 R80.20SP has amost always the /tmp/log/local folder used at about 90%:

tmpfs
20.0MB
5.9MB
14.1MB
30%
/tmp
tmpfs
40.0MB
18.1MB
21.9MB
45%
/fwtmp
/dev/mmcblk1p8
4.7GB
517.6MB
4.0GB
11%
/logs
/dev/mmcblk1p11
7.8GB
959.4MB
6.4GB
13%
/storage
/dev/mmcblk1p3
692.7MB
417.1MB
225.1MB
65%
/pfrm2.0
tmpfs
14.0MB
11.6MB
2.4MB
83%
/tmp/log/local
tmpfs
500.0MB
0.0KB
500.0MB
0%
/tetmp

 

Other similar devices on the same infrastructure (1470 R77.20.75 and R77.20.87) have this folder used at 0%. I wonder if it is a normal behavior for this device or if there is something that needs to be fixed. I know that it's a folder stored on the volatile memory but I'm not able to find any useful information.


Thank you in advance!

0 Kudos
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

 See my last post in What information is stored in /storage partition :

/tmp/log/local is the folder for local security log files folders - if you have a local management, older folders (0 1 2 3 4 5 6...) will be deleted. If managed centrally, logs are sent to the log server, so this /tmp partition is not so important anymore

So looks like there is local logging switched on in Embedded GaiA WebGUI !

Concerning R80.2SP: I did encounter the same issue a year ago, but lastly succeeded to set it to correct version. Use newest Jumbo + Dashboard on Management, and upgrade to R80.20.10 !

CCSE CCTE CCSM SMB Specialist

View solution in original post

7 Replies
PhoneBoy
Admin
Admin

First of all, R80.20SP is specific to Maestro, not SMB appliances like the 1500.
A TAC case suggests this is used for log storage, but I don't think it's security/traffic logs.
It also mentions a reboot will clear unneeded files from this directory.

Crzcarlo
Participant

Thank you for the reply.

Indeed from the GUI of the 1590 device I can see that it's using the Version: R80.20.01 (992000899). From the SmartConsole however I can only choose the Version R80.20, and than in the Gateway & Servers tab it reports R80.20SP (see attached file).

Now I wonder if this is just a UI problem or can cause come issue, since once a week (only for this specific device) the connection to the SmartConsole goes down and we have to reboot it.


@John_Fleming  do you mean that you checked the firewall access logs and you think that they are stored in the /tmp/log/local/ folder?

0 Kudos
John_Fleming
Advisor

I think its normal. Mine is about the same. I'm thinking its acting like a cache for firewall access logs when using the gui to search the logs. The contents of the dir is for sure access logs. 

[Expert]# cd /tmp/log/local/
[Expert]# df -h .
Filesystem Size Used Available Use% Mounted on
tmpfs 14.0M 9.8M 4.2M 70% /tmp/log/local
[Expert]#

0 Kudos
G_W_Albrecht
Legend
Legend

 See my last post in What information is stored in /storage partition :

/tmp/log/local is the folder for local security log files folders - if you have a local management, older folders (0 1 2 3 4 5 6...) will be deleted. If managed centrally, logs are sent to the log server, so this /tmp partition is not so important anymore

So looks like there is local logging switched on in Embedded GaiA WebGUI !

Concerning R80.2SP: I did encounter the same issue a year ago, but lastly succeeded to set it to correct version. Use newest Jumbo + Dashboard on Management, and upgrade to R80.20.10 !

CCSE CCTE CCSM SMB Specialist
Crzcarlo
Participant

Thank you so much, the local logging was indeed incorrectly switched on! I will also resolve the version issue as soon as possible.

0 Kudos
Greg_Harbers
Collaborator

Hi,

I have upgraded several 1550/1590 gateways to R80.20.30 and have noticed that in Smartconsole, any such devices are reporting no value in the version column. If I simply edit the gateway and click OK, the version returned is R80.20SP.

You said you resolved this with latest jumbos and smartconsole version. what versions were you using?

in my case, the mgmt server is R80.40 take 118, smart console build 423

thanks

Greg

0 Kudos
G_W_Albrecht
Legend
Legend

I am using R81 SMS now - in most recent Dashboard, you select hardware 15x0 and OS R80.20.

R80.40 SmartConsole Releases has version 424, try this one...

CCSE CCTE CCSM SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events