Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
BlueGrass
Contributor

Question in wan link Ping Connection monitoring

Hi Guys,

 

Would like to ask how to configure below if I plan to:

 

1. Ping 1 time only every second to the target

2. Remove the WAN interface default route if the ping keeps failure more than 5 times within 10 seconds. 

3. Recover the WAN interface default route if the ping keeps success more than 7 times within 10 seconds. 

 

Capture.JPG

 

 

 

 

 

 

0 Kudos
1 Reply
PhoneBoy
Admin
Admin

1. Ping is normally once a second.

2. Set failover pings to 50% or greater.

3. Don't believe this is something you can configure based on the above settings.
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    Tue 20 May 2025 @ 11:30 AM (PDT)

    Las Vegas: Check Point Hybrid Mesh

    Wed 21 May 2025 @ 11:30 AM (MST)

    Tempe, AZ: Check Point Hybrid Mesh

    Tue 03 Jun 2025 @ 06:00 PM (EDT)

    Montreal: CPX Recap

    Tue 10 Jun 2025 @ 06:00 PM (EDT)

    Quebec City: CPX Recap
    CheckMates Events