Create a Post
Showing results for 
Search instead for 
Did you mean: 

Flow Control on SMB Appliances

Hi Checkmates,


I have here a SMB appliance 770 running on R77.20.87 and i want to check or config/enable the flow control settings on the interfaces. It seems that commands like ethtool is now working on interfaces unlike 1500 series running on r80.20.10 embedded gaia


is there another way to do it via clish? or enable it

0 Kudos
1 Reply

Not for Ethernet, only for Serial ! This can be done on Device > Advanced Settings page - see under Serial port in Check Point 700/900 Appliances Administration Guide R77.20.87 p.93 ! Also Check Point 700/900/1400 Appliance CLI Technical Reference Guide R77.20.87 p.214.

0 Kudos