Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
altoas
Explorer
Jump to solution

BGP ECMP on Quantum Spark 1530 Appliance

Hey Folks, anyone managed to enable ECMP for BGP on these SMBs?

S4-GW1> show bgp summary

Routing Process BGP
State is on
Local Autonomous System is 51003
Default Weight is 0
BGP Route Rank is 170
ECMP is off
IGP Synchronization is off

 

I've tried to follow the General Topic for GW Advanced Routing, the device is locally managed.

 

GW1> set bgp ecmp on
^
Bad parameter starting at 'ecmp on'

 

I can try tweaking routed.conf, but not sure the syntax and if it will be overriten by the database uppon reload.

The GW is running R80.20 btw, the R81.10 seems unstable and doesnt work either I think.

Thanks

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

Which precise guide did you attempt to follow?
The Dynamic Routing guide for R80.20 SMB appliances is here: https://sc1.checkpoint.com/documents/SMB_R80.20.X/Dynamic_Routing/Content/Topics/81120.htm?tocpath=B...

There's no mention of ECMP anywhere in that document that I can find, which suggests this is not supported in Embedded Gaia.

View solution in original post

0 Kudos
1 Reply
PhoneBoy
Admin
Admin

Which precise guide did you attempt to follow?
The Dynamic Routing guide for R80.20 SMB appliances is here: https://sc1.checkpoint.com/documents/SMB_R80.20.X/Dynamic_Routing/Content/Topics/81120.htm?tocpath=B...

There's no mention of ECMP anywhere in that document that I can find, which suggests this is not supported in Embedded Gaia.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events