1800 HA PSU LED

[G_W_Albrecht]

In https://sc1.checkpoint.com/documents/Appliances/GSG_V2V3/EN/Content/Topics-V2-V3/Front-Panel.htm?toc... we read about the front LEDs of the 1800:

Now the red LED for Power redundancy will only light if only one PSU is connected, but is off if Power redundancy is available - we can see the status of Power redundancy  in cpview:

On the front LEDs the Power redundancy  LED is off and everything is OK:

It seems that the Quantum Spark 1600 / 1800 Appliance Getting Started Guide is slightly incorrect here 😎

[Chris_Atkinson]

Thanks - Did you already submit feedback to the Tech Pubs link/address in the same guide?

[G_W_Albrecht]

Yes 😉

[Sergei_Shir]

Hi 

We are checking and will update the documentation as required

Thank you for this feedback

[Sergei_Shir · Accepted solution]

The Getting Started Guide was updated:

Link:

https://sc1.checkpoint.com/documents/Appliances/GSG_V2V3/EN/Content/Topics-V2-V3/Front-Panel.htm 

Updated text:

• Power redundancy - Shows the status of the two internal PSUs. Single red LED.

  • The two Power Supplies are active - Off

  • Failure in one of the Power Supplies - On