After about 1500 lines of code, I would like to present you my new "SmartConsole Extention ➜ Execute CLI commands on all Maestro SGMs simultaneously" in version 5.2.
This is equivalent to the "g_all" command and can be executed in the SmartConsole.
1) On SmartConsole, go to > > > .
2) Enter the web-service manifest URL
https://www.ankenbrand24.de/ex/command.json
and click .
![EC_1_4534534.jpg EC_1_4534534.jpg](https://community.checkpoint.com/t5/image/serverpage/image-id/20224iE1C7A154A275FA4B/image-dimensions/642x215?v=v2)
Execute "Expert Mode" command on all Maestro SGMs simultaneously |
3) Open the menu item "Expert Mode".
4) Execute a command on all Maestro SGMs simultaneously for example "fw ver".
Enter the command and then press the "all SGMs" button.
This button corresponds to the "g_all" command.
The button is only visible if you have selected a Maestro gateway above.
![Maestro_1_324523454.jpg Maestro_1_324523454.jpg](https://community.checkpoint.com/t5/image/serverpage/image-id/20225iF31B0148D3C70BA8/image-dimensions/644x251?v=v2)
SmartConsole extension to execute commands on all gateways, VSX gateways, SMS and MDS:
- Execute commands in "Expert Mode" and "CLISH".
- Get and Push GAIA CLISH configs from/to gateway.
- Execute "Expert Mode" and "CLISH" commands on all gateways simultaneously.
- Execute "Expert Mode" and "CLISH" commands on selected gateways simultaneously.
- Command history -> Execute the last 20 commands again.
- Status about the success of the action.
- One Click
- Open a cli command in SmartConsole with one mouse click and execute the command on a gateway.
- Create your own permanent list with 40 commands.
- Uses a predefined list of 40 CLI commands.
Here you can find the original article with the extention:
Execute Commands ➜ SmartConsole Extension
➜ CCSM Elite, CCME, CCTE