QOS for more than 10Gbps

[Arthur_DENIS1]

Hi guys,

Question about QoS blade.


We are using maestro running R82 version.

Our internet line is going to be upgraded, and we want to use QoS for 20Gbps - however, there is no possibility inside SmartConsole to set more than 10Gbps (see screenshot)

I cannot find something related to this limitation in the doc, are you aware about this ?


Idea is to restrict the bandwidth per connection, so we cannot use the "application rate base limiting" without using QoS blade.

thanks for your input 

[Tal_Paz-Fridman]

You might also want to consider using Limit objects on Rules

[Arthur_DENIS1]

Hi

Unfortunately as i say before, it's not an option as this limit objects can be use only per rule, and not per connection (we want to enforce a limit per session/user and not for a whole rule)

[PhoneBoy]

I suspect the QoS blade hasn't been updated with interface sizes larger than 10GB (e.g. 25GB, 100GB).
This is probably an RFE.

[Arthur_DENIS1]

i was afraid about that answer ...

[Ilya_Yusupov]

@Arthur_DENIS1  - thank you for your feedback, i will open RFE and will work with our RnD to resolve it.

[Arthur_DENIS1]

Thanks 🙂