Monitoring Individual SGMs in Maestro R81.20 via SNMP

[OriN]

Hi all,

We are running Maestro R81.20 Take 84 with a 4-member Security Group and monitoring it with PRTG via SNMP.

Currently, we only see Security Group / SMO statistics. Is there a way to monitor each SGM separately (CPU, memory, interfaces, etc.) and create separate sensors or devices in PRTG for each member?

I found documentation about per-member SNMP monitoring, but it appears to be available only for R82. Is this supported in R81.20 as well? If not, is there another documented way to monitor individual SGMs?

Thanks.

[Danny]

Try this SNMP extension. It's member-specific even for R81.20 Maestro members.
Skyline also supports R81.20 but it's a dedicated server to be set up, so you could then also upgrade to R82 as well.

[Lesley]

With some NAT tricks you can also monitor the other members. Check this sk:

https://support.checkpoint.com/results/sk/sk181373

[Lari_Luoma]

Just want to mention here that R82+ has a native way of monitoring SGMs indepdently.