Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Johan_Rudberg
Contributor
Jump to solution

The new ChromebookOS through Checkponit Firewall with IPv6

Hello

 

Since Google released the new Chromebook OS, we cant use IPv6 on our wireless networks where the Chromebooks are. We have SLAAC enabled in the router, how do I enable SLAAC in the Checkpoint Firewall?

Our Checkpoint setup is like this:

2x 15600 in HA with VSX and version R80.20 ipv6 in enabled in the firewall.

 

 

//Johan

0 Kudos
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

You can do the all sing CLI, too - But as it is VSX i would  contact TAC !

CCSE CCTE CCSM SMB Specialist

View solution in original post

0 Kudos
5 Replies
G_W_Albrecht
Legend
Legend

First step would be to enable IPv6 on the GW cluster in GAiA WebGUI and reboot. then,

On the IPv6 tab (optional), do one of these: 

• Select Obtain IPv6 address automatically to get the IPv6 address from the DHCPv6 server. 

• Enter the IPv6 address and mask length in the applicable fields. 

CCSE CCTE CCSM SMB Specialist
0 Kudos
Johan_Rudberg
Contributor
Since its a VSX setup the GWs does not have a WebUI, CLI is required.

In the logs when a Chromebook tries to connect, this error is shown:

Firewall - Domain resolving error. Check DNS configuration on the gateway (0)

However the action is Accept but the connection is Alert.
0 Kudos
G_W_Albrecht
Legend
Legend

You can do the all sing CLI, too - But as it is VSX i would  contact TAC !

CCSE CCTE CCSM SMB Specialist
0 Kudos
Johan_Rudberg
Contributor
Alrighty thank you I try the TAC.
0 Kudos
G_W_Albrecht
Legend
Legend

...not to trash the working VSX config is the objective here 😉

CCSE CCTE CCSM SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events