Full physical memory on R80

[Stelios]

Hi guys,

What is the commands/steps to reduce the memory when the swap memory is above the 0?

[G_W_Albrecht]

Use the following steps:

- open up the box

- remove as much memory as you need

- be happy 😎

[AntiSpoofing]

If I understand your question; you are showing full physical memory utilization AND you are starting to see swap usage (>0).  My inclination is to reboot/restart the gateway during a maintenance window.  Linux has a tendency to used free memory to cache frequently used files to speed up the performance of the device.  Unfortunately, this also decreases the "free" memory.  The solution is the reboot; normally once every 6 months with a failover, actually not a bad idea since you are confirming the boot sector.

HTH!

[Dmitry_Krupnik]

Hi Stelios,

I suggest to start from investigation step and make sure, that there are no configuration problems. Please provide more information about your device, version, setup and blades which you are using. 

[PhoneBoy]

On what exactly?
Gateway?
Management?
Precise version/JHF level installed?
A dump of running processes might be useful also.