Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
guesstimation
Participant
Jump to solution

Cluster re-sync

Hello, During network maintenance we have to break Sync link between CP HA cluster nodes. After we reconnect our Sync, how do we ensure/verify that cluster nodes are in Sync? Will it recognize that it lost number of Sync packets and will try to resend them or no? Do we need to somehow force re-sync?
0 Kudos
1 Solution

Accepted Solutions
_Val_
Admin
Admin

No special action is required from your side. ClusterXL will recognise both sync failure and restore of the normal status. Full sync will be performed when back to normal.

To check cluster is fully operational, run cphaprob stat. If you see one member as Active and another Standby, you are good.

View solution in original post

2 Replies
_Val_
Admin
Admin

No special action is required from your side. ClusterXL will recognise both sync failure and restore of the normal status. Full sync will be performed when back to normal.

To check cluster is fully operational, run cphaprob stat. If you see one member as Active and another Standby, you are good.

Timothy_Hall
Champion
Champion

In addition to what Val said, cluster sync events are logged by default to $FWDIR/log/fwd.elg.  So after breaking and re-establishing sync you should see messages something like "Full Sync Started" then "Full Sync Completed" in that fwd.elg file.

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events