Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

1200R as a Radius client?

Hi all,

I was wandering if it is possible to set a port on the 1200R as a Radius client.

Client is using radius authentication on all switch ports and really want's  the 1200R to be authenticated on their network.

Scanning the CLI manuals shows no results, anyone has idea's if it is possible?

Regards,

Henk Geurts

0 Kudos
5 Replies
Highlighted
Sapphire

I know this is possible in GAIA (see sk105575: How to configure RADIUSauthentication between Gaia OS and Microsoft Windows Server 2008), for Embedded GAiA i would try to do the configuration in a similar way...

0 Kudos
Highlighted

Thank you!

We will give it a try.

0 Kudos
Highlighted
Sapphire

Afterwards please share your results ! 😊

0 Kudos
Highlighted
Admin
Admin

What that describes is configuring GaiaOS to use RADIUS to authenticate users.
I think what's being asked for is authenticating the 1200R device to a RADIUS server.
As far as I know, this isn't supported on any Check Point device.
0 Kudos
Highlighted

Checked all the manuals and the Check Point as a RADIUS client doesn't seem possible. The SK gives an interesting way of using vendor-specific attributes.  It might work but we need to test it.

Thanks for the reply!

0 Kudos