When will LSMcli support 1500 Appliance

[Andreas_Aust]

Hi,

is there a roadmap when LSMcli will support 1500 Appliance ?

[PhoneBoy]

I assume R80.40

[Andreas_Aust]

Output from LSMcli R80.40EA (no 1500 Aplliance)

AddROBO VPN1 <RoboName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D[E]:<DynamicObjectName>=<IP1>[-<IP2>] [-D[E]:..]]
[-F=LOCAL|DEFAULT|<Firmware-name>] [-M=<MAC>] [-K=<ProductKey>] [-D[E]:<D.O. name>=<IP1>[-<IP2>] [-D[E]:..]]
AddROBO CPSG80 <RoboName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D[E]:<DynamicObjectName>=<IP1>[-<IP2>] [-D[E]:..]]
AddROBO 1200R <RoboName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D[E]:<DynamicObjectName>=<IP1>[-<IP2>] [-D[E]:..]]
AddROBO 1430/1450 <RoboName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D[E]:<DynamicObjectName>=<IP1>[-<IP2>] [-D[E]:..]]
AddROBO 1470/1490 <RoboName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D[E]:<DynamicObjectName>=<IP1>[-<IP2>] [-D[E]:..]]
** AddROBO VPN1Cluster <Profile> <MainIPAddress> <SuffixName> [-S=<SubstitutedNamePart>] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D:<DynamicObjectName>=<IP1>[-<IP2>] [-D:..]]
** AddROBO CPSG80Cluster <Profile> <MainIPAddress> <SuffixName> [-S=<SubstitutedNamePart>] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D:<DynamicObjectName>=<IP1>[-<IP2>] [-D:..]]
** AddROBO 1200RCluster <Profile> <MainIPAddress> <SuffixName> [-S=<SubstitutedNamePart>] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D:<DynamicObjectName>=<IP1>[-<IP2>] [-D:..]]
** AddROBO 1430/1450Cluster <Profile> <MainIPAddress> <SuffixName> [-S=<SubstitutedNamePart>] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D:<DynamicObjectName>=<IP1>[-<IP2>] [-D:..]]
** AddROBO 1470/1490Cluster <Profile> <MainIPAddress> <SuffixName> [-S=<SubstitutedNamePart>] [-CA=<CaName> [-R=<KeyIdentifier#>] [-KEY=<AuthorizationCode>]]
[-D:<DynamicObjectName>=<IP1>[-<IP2>] [-D:..]]

[Alon_Alapi]

Hi,

LSMCli support for 1500 series is already part of R80.40 and will be release in the near future also as part of R80.30 JHF.

What EA build are you testing? it is probably before we added the support.

[Andreas_Aust]

I suppose I'm on the latest build:

This is Check Point's software version R80.40 - Build 154

[Alon_Alapi]

Hi,

This is not the latest R80.40 build.

Please contact the EA team to get a newer version.

[David_Moss]

Hi,

Public EA R80.40 version will be updated this week, so you will be able to download a newer version via User Center.