LOM HTML5 Support

[prashanth]

Hi There, 
  I have a new CheckPoint 7000 appliance and I don't have the full order details.
I wish to check from CLI whether this new appliance can support HTML5?

Thanks in advance

[G_W_Albrecht]

According to https://support.checkpoint.com/results/sk/sk175086 it can, see https://sc1.checkpoint.com/documents/Appliances/LOM_HTML5_Card_AdminGuide/Content/Topics-LOM-HTML5-C... - if it is at least a Plus model. Look for available 10 GbE in Expansion slot or memory 32MB ! A LOM port is always present...

[Chris_Atkinson]

The 7000 can support this LOM type.

What does "show asset lom-info" or "show lom" & "show lom type" report?

[prashanth]

@Chris_Atkinson sorry for the late reply.
Please find the command output.

> show asset lom-info
LOM Status: Installed
LOM Firmware Revision: 5.18

> show lom
Firmware Revision : 5.18
IP Address : 10.183.177.117

> show lom type
CLINFR0329 Invalid command:'show lom type'.
>

[Dolev · Accepted solution]

This FW is Java-Based LOM, when they were purchased? can you send me offline Serial Number of the unit?

As for the show lom it's available only in R81.20 and above.

[Chris_Atkinson · Accepted solution]

Per sk175086 HTML5 LOMs should report version 6.XX

If you share your details with @Dolev we can confirm further alternately you may wish to discuss the replacement/upgrade options for the LOM card with your local SE.