How to take MTR on gaia R80.40

[Firdhous_M]

Hi,

I need to take MTR output from checkpoint gateway. if MTR command available for checkpoint or any other command need to be used.

Thanks in advance...

[Chris_Atkinson]

Are you asking how to perform a traceroute?

[Timothy_Hall]

I hadn't heard of the MTR tool before, but it appears to be similar to the pathping Windows utility I mentioned in my book.  It combines the ping and traceroute commands to pound each router along the path to a destination, and measure min/max/average transit times at each hop in an attempt to find where latency and/or packet loss are being introduced in the network path, and also measure jitter.  MTR doesn't seem to be included with Gaia 3.10, but similar to the strace utility I mentioned in my book, there is a precompiled copy of MTR you can download from here:

http://vault.centos.org/3.8/os/x86_64/RedHat/RPMS/mtr-0.52-2.x86_64.rpm

Not sure if you can make it work under Gaia, and be warned that adding additional software to the Gaia OS is not supported by Check Point.

[Aaron_Wrasman]

For R80.30 I had to use:
https://vault.centos.org/5.5/os/i386/CentOS/mtr-0.71-3.1.i386.rpm

[_Val_]

@Timothy_Hall @Aaron_Wrasman Indeed, any third party software is not supported.