Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Cloudguard NAT

Jump to solution

Hi,

 

We are implementing AWS Cloudguard Ingress gateway as below:

 

Public -> NLB -> Cloudguard -> ALB

 

Traffic from NLB, we are seeing the destination is our firewall IP Address. Is this normal?  

 

We tried to do NAT and translate it to the ALB object, the problem is NAT rule doesn't accept this because destination translation cannot use LB objects.

 

Can't find a guide for this. 

0 Kudos
1 Solution

Accepted Solutions
Highlighted

Hi,

 

Thank you so much for your reply, will try it out immediately.

View solution in original post

0 Kudos
2 Replies
Highlighted
Admin
Admin
Yes, the traffic is directed to the firewall IP.
I suspect you will need to follow the instructions here: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

Yes, this is for ELBs on the inside, but the concept/configuration should be the same.
The Logical Server object does the necessary NAT in this case.
0 Kudos
Highlighted

Hi,

 

Thank you so much for your reply, will try it out immediately.

View solution in original post

0 Kudos