Who rated this post

cancel
Showing results for 
Search instead for 
Did you mean: 
PhoneBoy
Admin
Admin

To create a bridge or a VLAN trunk, you will first need to unassign LAN ports from the LAN1_Switch.
Once you've done that, you can:

  • Create a bridge between two ports
  • Use a single port on a different LAN segment (no VLAN tags)
  • Create a different switch to assign the ports to (with a different network segment, again without VLAN tags)
  • Create a VLAN trunk (define each VLAN you wish to be available on the interface with the relevant network configuration)

See the docs: https://sc1.checkpoint.com/documents/R77.20.87/1400_Local_AdminGuide/html_frameset.htm 

View solution in original post

(1)
Who rated this post