Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
prashanth
Participant

SmartMove Errors Assistance

Hi There,

We are migrating from Cisco ASA to CheckPoint with the help of SmartMove tool. I have noticed below error messages under the errors.html. Can you please assist to resolve these errors.

28Unrecognized topology details: 206.190.106.57 255.255.255.255.: cannot create network objects;
29Unrecognized topology details.: interface details: Interface_inside.;
30Unrecognized topology details: 169.141.1.74 255.255.255.255.: cannot create network objects;
31Unrecognized topology details: 169.141.36.33 255.255.255.255.: cannot create network objects;
32Unrecognized topology details: 169.141.36.36 255.255.255.255.: cannot create network objects;
33Unrecognized topology details.: interface details: Interface_RMDS.;
34Unrecognized topology details: 10.65.7.8 255.255.255.255.: cannot create network objects;
35Unrecognized topology details: 203.208.227.69 255.255.255.255.: cannot create network objects;
36Unrecognized topology details.: interface details: Interface_KEWEB.;
37Unrecognized topology details: 10.1.24.1 255.255.255.255.: cannot create network objects;
38Unrecognized topology details.: interface details: Interface_KETRADE.;
39Unrecognized topology details: 10.97.3.4 255.255.255.255.: cannot create network objects;
40Unrecognized topology details.: interface details: Interface_KETRADE-NEW.;


Thanks in Advance

 

 

0 Kudos
6 Replies
the_rock
Legend
Legend

Its been some time since I used that tool for Cisco to CP conversion, but it did work fine, though I supposed few things have changed since then. Did you follow the actual smart move sk for all the steps?

If yes, you would need to check where those IP addresses are referenced and go from there.

Andy

0 Kudos
Tal_Paz-Fridman
Employee
Employee

Adding @JonathanKukin 

0 Kudos
the_rock
Legend
Legend

This is the sk I was referring to.

Andy

https://support.checkpoint.com/results/sk/sk115416

0 Kudos
prashanth
Participant

Yes, I'm following this KB but still encountered the errors.

0 Kudos
the_rock
Legend
Legend

Are you able to tell, ballpark estimate, how many network objects are missing?

Andy

0 Kudos
PhoneBoy
Admin
Admin

Note that this tool largely automates the process, but in some cases manual steps may be required for a successful migration.
This might be a situation where you have to manually create the relevant object(s).
However, without knowing what the errors are in relation to (specifically the relevant configuration from the Cisco side), it's difficult to tell you how to resolve this.

You may want to work with your Check Point SE on this.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events