need to make vpn

[sivareddy2611]

TASK-1:

Establish the VPN between FW5 PC3 and Site1-FW3 PC1

Verification:

Ping from PC3 to PC1
Ping reply should be come and packet should be encrypted in Smart view Tracker.

TASK-2:
Establish the VPN between FW5 PC3 and Site1-FW4 PC2

Verification:

Ping from PC3 to PC2
Ping reply should be come and packet should be encrypted in Smart view Tracker.

TASK-3:
Establish the VPN between FW5 PC3 and Site1-FW6 PC4

Verification:

Ping from PC3 to PC4
Ping reply should be come and packet should be encrypted in Smart view Tracker.

Note:

i tried as shown below youtube video link but not worked

https://www.youtube.com/watch?v=mYgOztne_Gg&t=13s

please help me someone on this i am trying from last one week

[PhoneBoy]

Version/JHF of components in question?
What is the precise configuration on each gateway in terms of the encryption domain?
Are all gateways in the same VPN community?
What precise errors are you seeing in SmartView?

[sivareddy2611]

Version r77 and all gateways are in same vpn community,

Task are mentioned in the question and when i try as shown in the YouTube video link , i am able to ping pc3 to pc1 but i am not getting logs in pc3 and the ping should encrypt with vpn

[the_rock]

You can use vpn admin guide and follow info to set up vpn tunnel. Once up, then if traffic is not going through, more debugs can be done

vpn debug trunc

vpn debug ikeon

vpn debug ikeoff

get $FWDIR.log ike.elg and vpnd files

Andy

[sivareddy2611]

What does it mean can you explain more clearly?

What about the YouTube video is that correct