VSX boot time

[Magnus-Holmberg]

Hi,

So the boot times are getting more and more crazy on large vsx systems.
Within R80.30 3.10, and 41 VS we needed about 15min (uptime of the node) for all VS to be started.
Within R80.40 we now need 47 min to boot the same cluster nodes, it takes about 30min before the VS even start to come up.
Boot time of the actual physical box is excluded from this time, this is from when you are able to login via SSH.

Is there a plan to limit this or is the actual practical limitation of VSX <25 VS per cluster
After 25 VS on there are a lot of pain points,

Regards,
Magnus

[Chris_Atkinson]

For context what's the underlying system/hardware config:  XFS, SSD etc?

[Magnus-Holmberg]

Open Server, HPE DL360G10, 
2 x Xeon Gold 5122, 192Gb ram
2 x 480Gb SSD Raid1

Clean install upgrade process, less than 500Mbit traffic, <50.000 connections, <10% CPU load
R80.40, HFA173

[Chris_Atkinson]

@Magnus-Holmberg What is your current experience like, has there been any noticeable change?

[Henrik_Noerr1]

We have the exact same issue. Boot times is more than an hour and really hurting our patch cycles, and general trust when downtime occurs.

When the clusters are available for ssh login no Virtual Systems are online for maybe 30 minutes.

After this Virtual Systems are loaded sequentially for another 30 minutes.

So in total we use 1h plus to boot a node. We see no performance related issues with top, iotop or other debugging tools.

Actually the box is idle until policies start loading. We do see that the process 'cgroup' is intermittently using some CPU.

We mostly use Lenovo 850p servers with 32 cores, and 256gb ram running a mix of r80.40 and r81.10

Not sure why I have not created a TAC case already. I will do that.

[Magnus-Holmberg]

It has improved alot in later HFA on R81.10 and R80.40 for our smaller clusters with <20 vs. more than 50% reduction in boot time.
Going to upgrade large clusters within some weeks to see how it is when 50vs on them

[Magnus-Holmberg]

Upgrading to R81.10 with clean install and added HFA129 on a VSX with 42 VS now.
And the VSX reconfigure takes 1hour, in R80.30 3.10 same would take ~15min

[Magnus-Holmberg]

In regards to restarting a VSX Node.
Its 47min before the VS are starting and additional ~25min for the VS to start.
So i would say its a big problem.

[Magnus-Holmberg]

Tested R81.10 HFA132 and box was booted including all VS started within 15min
But here the CPU is something wrong with, without traffic its 100% loaded, however it goes down after 20min
And the box that has the traffic is less than 18% (on the none upgraded member)

[Chris_Atkinson]

We see PRJ-45520 incorporated into the recent JHFs.

Did the CPU trend continue or have you rolled it back?

[Magnus-Holmberg]

Reverted because everything takes to longtime for it to fit in a 6 hour servicewindow.

Having boxes taking 1h to boot dosn´t work because it gives no time for tshoot.
So put on HFA versions that we know works from before in smaller clusters.