- Products
- Learn
- Local User Groups
- Partners
- More
What’s New in Device Diagnostics?
Dec 2nd @ 5pm CET / 11am EST
AI Security Masters
Security in the Pace of AI:
From Threat to Force Multiplier
CPX is Back!
Join us in Las Vegas, Vienna, and/or Bangkok!
Check Point Named a Leader
The Forrester Wave:
Enterprise Firewall Solutions, Q4 2026
What’s New in Agentic Network Orchestration
CheckMates Go:
Fun Ding
Question regarding VSX...
I have a VS with a VLAN 20 interface on 10.1.1.1.
I need to create a second VS and would ideally like the same network behind it, but it won't let me use VLAN 20 as it's already is use on another VS.
Hugely over simplified diagram below showing what I'd like to achieve. The reasoning (because I'm sure you're wondering) is because VPN's on VS1 are screwed, so while that's being debugged I was hoping for a really quick fix by creating a new VS and bringing certain critical VPN traffic in through VS2 and still being able to access the kit on VLAN 20 that is already behind VS1.
Documentation hasn't been massively helpful in explaining this scenario. Is there a way to do what I need? I basically need to create the 'green line' on the diagram.
Would a Virtual Switch allow me to do this?
I'm also happy to have a different VLAN and subnet on VS2 if that's easier. I'm guessing a Virtual Router is needed in that case? But it's running VSLS and I gather VR's and VSLS don't play nicely?
(R81.20, managed from Multi Domain)
Overlap with IP space should not be the issue here as stated in
VSX facilitates connectivity when multiple network segments share the same IP address range (IP address space).
This scenario occurs when a single VSX Gateway protects several independent networks that assign IP addresses to endpoints from the same pool of IP addresses.
Thus, it is feasible that more than one endpoint in a VSX environment will have the identical IP address, provided that each is located behind different Virtual System.
Overlapping IP address space in VSX environments is possible because each Virtual System maintains its own unique state and routing tables.
These tables can contain identical entries, but within different, segregated contexts.
Virtual Systems use NAT to facilitate mapping internal IP addresses to one or more external IP addresses.
The below figure demonstrates how traffic passes from the Internet to an internal network with overlapping IP address ranges, using NAT at each Virtual System.
VLAN overlap can be solve by adding indeed a virtual switch. See also this topic for more info
Using a Virtual Switch is the usual way this is facilitated.
Overlap with IP space should not be the issue here as stated in
VSX facilitates connectivity when multiple network segments share the same IP address range (IP address space).
This scenario occurs when a single VSX Gateway protects several independent networks that assign IP addresses to endpoints from the same pool of IP addresses.
Thus, it is feasible that more than one endpoint in a VSX environment will have the identical IP address, provided that each is located behind different Virtual System.
Overlapping IP address space in VSX environments is possible because each Virtual System maintains its own unique state and routing tables.
These tables can contain identical entries, but within different, segregated contexts.
Virtual Systems use NAT to facilitate mapping internal IP addresses to one or more external IP addresses.
The below figure demonstrates how traffic passes from the Internet to an internal network with overlapping IP address ranges, using NAT at each Virtual System.
VLAN overlap can be solve by adding indeed a virtual switch. See also this topic for more info
Hi @Lesley , thanks for your reply. I've tried this tonight while the office is empty and it works a treat.
I was a bit nervous at first because I couldn't create the virtual switch on VLAN 20 - once again, it was already in use.
I deleted that VLAN interface from VS1, then added the virtual switch on the main VSX using VLAN 20, added a new interface "Leads to virtual switch" on VS1 and put the IP back on. Same on VS2, then VPN'd into VS2 and I can hit the servers originally behind VS1. Great result!
I've learnt to name the virtual switch something relevant as you can't rename it once it's there.
Thanks again!
Using a Virtual Switch is the usual way this is facilitated.
Thanks again. I don't have much day-to-day exposure to VSX, it's quite a simple deployment and it's sat there and ran with no problems for 10 years. I'm glad I've learnt something new 🙂
I don’t think you can have the same VLAN 20 attached to two separate VS interfaces like that. The VLAN is effectively owned by the VS interface, so VS2 can’t just reuse it to reach the same L2 network behind VS1. If a separate VLAN/subnet is acceptable, that’s probably the cleaner workaround: put VS2 on its own VLAN and route between the two VSs. But with VSLS in the mix, I’d be careful with the VR approach and check how the VSs are distributed/synchronised. For the temporary VPN workaround, a separate transit VLAN between the VSs may be the simplest option.
Leaderboard
Epsum factorial non deposit quid pro quo hic escorol.
| User | Count |
|---|---|
| 28 | |
| 8 | |
| 7 | |
| 5 | |
| 5 | |
| 4 | |
| 4 | |
| 4 | |
| 4 | |
| 3 |
Tue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsTue 24 Nov 2026 @ 01:30 PM (GMT)
La nueva realidad de los ataques DDoS: autonomía, escala y el futuro de la defensaWed 02 Dec 2026 @ 03:30 PM (GMT)
The New DDoS Reality: Autonomy, Scale, and the Future of DefenseThu 03 Dec 2026 @ 11:00 AM (EST)
Under the Hood: Check Point Cloud Firewall for Nutanix - How to Secure your AI WorkloadsAbout CheckMates
Learn Check Point
Advanced Learning
WE SECURE YOUR AI TRANSFORMATION