Few days ago this little toy arrived and because it is relatively new device in CheckPoint product line I decided to take few pictures for you. Sorry that some pics are poor quality.
Product came with DHL in two card boxes for extra protection:
CheckPoint kindly printed for you what firmware to expect. Also, it seems that shipment was from Germany:
Inside there are appliance itself, quick start guide and box with power supplies, cables, etc:
Rear view of the appliance. Switch on the right is not power on/off but a reset button. It is powered on automatically:
Front view exposing different ports and a pull out ID tag:
Inside there are the motherboard, Intel(R) Atom(TM) CPU C3558 @ 2.20GHz CPU, 1x DDR4 8GB DIMM, 240GB Intel SSD:
Stickers on device bottom panel:
Accessories include 2xPSU, power cables, LAN and Console cables, RJ45 Loopback plug, etc:
A quick rack mount kit I made from an old R&M patch-panel with power supplies mounted 😁
Appliance mounted in the rack, powered on and ready to serve!
CPU Info (x4):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 95
model name : Intel(R) Atom(TM) CPU C3558 @ 2.20GHz
stepping : 1
microcode : 0x2e
cpu MHz : 2199.980
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 21
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm 3dnowprefetch epb cat_l2 intel_pt spec_ctrl ibpb_support tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms mpx rdt_a rdseed smap clflushopt sha_ni xsaveopt xsavec xgetbv1 dtherm arat pln pts
bogomips : 4399.96
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
RAM Info:
Memory Device
Array Handle: 0x0024
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2400 MHz
Manufacturer: Waris
Serial Number: 51901854
Asset Tag: BANK 0 DIMM1 AssetTag
Part Number: H4734160
Rank: 1
Configured Clock Speed: 2133 MHz
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Disk Info:
/dev/sda:
ATA device, with non-removable media
Model Number: INTEL SSDSC2KB240G8
Serial Number: PHYF002300WB240AGN
Firmware Revision: XCV10110
Media Serial Num:
Media Manufacturer:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x006d)
Supported: 10 9 8 7 6 5
Likely used: 10
Configuration:
Logical max current
cylinders 16383 0
heads 16 0
sectors/track 63 0
--
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 468862128
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 228936 MBytes
device size with M = 1000*1000: 240057 MBytes (240 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
unknown 119[6]
* unknown 119[8]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* unknown 76[15]
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* reserved 69[2]
* reserved 69[3]
* reserved 69[4]
* Data Set Management TRIM supported (limit 4 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 55cd2e4152161a9c
NAA : 5
IEEE OUI : 5cd2e4
Unique ID : 152161a9c
Checksum: correct
That's for now. Hope you like it 😉