I'm after a bit of help regarding mac addresses on an appliance running R80.20.
I have 2 devices in a VSX cluster and they are LACP connected to 2 CIsco 9K's running VPC. The patching is full mesh. There is a single VPC towards one of the Checkpoint appliances and another VPC towards the other.
On the Cisco switches I am seeing the following mac address coming from our ISP on both switches:
This is fine and makes sense 🙂
On the Cisco switches, I am also seeing the following mac address coming from the Checkpoint appliances and it seems to flap between each one but is never seen via both at the same time.
I have gone onto both Checkpoints, and in every VS issued the following command:
netstat -an | grep 02
I see nothing remotely close to the above mac addresses in the output on either of the appliances.
I have also trawled the configuration and there is no static reference and I have looked at all interfaces on the appliances and none have even a similar address.
Can anyone point me to some commands that might help, or, even offer up what may be going on here. It seems a little too coincidental to not be related to the ISP mac address, but on the same hand, I can't find any reference.