Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
LeeBingKang
Contributor

Failed to get table status for connections with "fw tab -t connections -s" command

Jump to solution

Dear all,

 

Recently, i faced an issue whereby failed to get the connection table on the standby firewall as picture:

connection table failed.PNG
 
Furthermore, the firewall is a standby unit, appliance 6200, R80.40 jumbo hotfix 94
 
Meanwhile, i also tried to find any SK or community post  regarding to this issue but failed. Hence, I appreciate if someone able to point the possible cause and any impact on this issue.
 
Thank you.
0 Kudos
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

What happens if you try fw tab -t connections -s instead of fw tab -t connetions -s

Missing a little C 😎

CCSE CCTE SMB Specialist

View solution in original post

4 Replies
G_W_Albrecht
Legend
Legend

What happens if you try fw tab -t connections -s instead of fw tab -t connetions -s

Missing a little C 😎

CCSE CCTE SMB Specialist
LeeBingKang
Contributor

Ah, thanks for your remind on the missing keyword. 

0 Kudos
G_W_Albrecht
Legend
Legend

Miss-spelled keyword 😎

CCSE CCTE SMB Specialist
0 Kudos
Timothy_Hall
Champion
Champion

Also consider using fw ctl conntab which was somewhat recently documented and is a bit more human readable.

New 2021 IPS/AV/ABOT Immersion Self-Guided Video Series
now available at http://www.maxpowerfirewalls.com