Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
yishaia
Explorer

Checkpoint Shutdown by UPS

Hello,

 

We use checkpoint 5100 series,

also we use ADVICE UPS devices,

is there any way to automatic shutdown the FW on power failure after the UPS is start to work on the battery?

lets say after 10 minutes after the UPS is starting to work on the battery?

 

most of the time when I have power failure gaia system is broken (reboot loop)

 

thanks

 

0 Kudos
5 Replies
G_W_Albrecht
Legend
Legend

How will the UPS communicate the power failure to the GW ? You can shutdown the 5100 using e.g. SSH.

CCSE CCTE CCSM SMB Specialist
0 Kudos
PhoneBoy
Admin
Admin

0 Kudos
the_rock
Legend
Legend

Very interesting inquiry, but as @PhoneBoy indicated, not supported. 

0 Kudos
G_W_Albrecht
Legend
Legend

- buy a raspi o.o.

- check power failure with raspi sensor

- raspi shutdown FW using command over SSH

CCSE CCTE CCSM SMB Specialist
0 Kudos
rrbranco
Contributor
Contributor

perhaps you can try something like this:

 

 

if UPS supports API, send an "run script" API call to the management server 


https://sc1.checkpoint.com/documents/latest/APIs/?#cli/run-script~v1.8%20

 

 

then, ask the management to run a script on the relevant gateway that shuts it down.

https://community.checkpoint.com/t5/Scripts/GAIA-Easy-execute-CLI-commands-from-management-on-gatewa...

 

 

can the UPS send snmp traps ?    then send a trap to the snmp server and start everything from the snmp server 

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events