Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Adity12
Collaborator

Bonding Interface CP Problem when connect to 2 different device

Hi All,

Have a good day.

 

I faced some issues with bonding the interface with mode LACP to 2 different devices.

when this LACP connects to 2 different devices, it will cause some segment network can't be accessible from CP.

we use 2 interfaces 10 GB for 1 bond.

when we disable 1 of these interfaces, that segment network can access but slowly.

Currently, I using Checkpoint 15600 with R80.10 take 154

Here is the following topology.

If the explanation is not clear, please let me know.

 

Thanks Regards

Dio Aditya Pradana

0 Kudos
3 Replies
Chris_Atkinson
Employee
Employee

What are the switches, are they running VSS/VPC/MLAG or something else?

Note R80.10 reached end of support some time ago and an upgrade is recommended.

CCSM R77/R80/ELITE
Adity12
Collaborator

Hi @Chris_Atkinson

We are using switch from juniper with series QFX5120-48Y and running ESI-LAGs

 

0 Kudos
Chris_Atkinson
Employee
Employee

Are the LACP rate and hashing parameters aligned?

Also can you share the output of "show asset network" ?

CCSM R77/R80/ELITE
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events