Update R81.10

[Softwhere]

Hello,

We have a customer with 2 1600 devices, Both were running R80.20.40 and we downloaded the R81.10 and started the update. On the one Device no problem worked as should and is presently running with the new Version. the other Device has 2 PPPoE connections configured as load balancing. The one is for VPN only, (priority 6) the second, (priority 4), is for Internet, Email (Email Server on premise using https), and Remote VOIP. after the update Internet worked from LAN, and only 1 VPN Site-Site worked, the second Site-Site, (using PPPoE) did not connect, (IKE Error), Email was not working, and externally GUI to Device was also not functioning. It seems the Device got confused with 2 Internet connections. Returned to R80.20.40 and working again.

BTW is locally managed. Has anyone come across this issue?

Thanks, 

[G_W_Albrecht]

I would suggest to contact TAC and report this as a bug.

[Softwhere]

Thanks, I "tried" to start a CSR but cannot do so anymore directly with CP, need to go over Distributor, (WestCon), and it seems support is a "strange" word for them. Hopefully they come around. Just thought maybe someone had similar issue.

Thanks again.

[_Val_]

It sounds like you are having a collaborated support contract through one of our support partners. Just ask them to pass your request to TAC and work with them. 

[Softwhere]

Thanks Val, yes is correct, but this really does not work well used to be able to go directly to CP, was much better.

[G_W_Albrecht]

When renewing support, better go for Direct Enterprise Support Premium - not much higher costs, but you can open a chat with TAC anytime.

[Softwhere]

Super, and is it possible to get direct Support from CP? We have several customers, mostly 1500, 1400 Series, and just now need some support updates for some have asked for prices about the "Direct Enterprise Support" see what happens 🙂

Appreciate the tipps.

[G_W_Albrecht]

Yes, the price difference is only small, and to be able to contact TAC directly makes much sense with SMB - CP will mostly do a quick remote session to see (and possibly fix) the issue and also help with configuration if needed. I am working as a CCSP and found it often much easier to handle the problem that way, as the SMB team is used to it.

[_Val_]

As mentioned already, you need a Direct Enterprise Support contract in place to do that. 

[Softwhere]

Yes thanks for the point, we have asked for prices and have already ordered for 2 customers the direct Enterprise support. Just needed someone to tell us what to order. Thanks again. At any rate still have no solution for the problem 😞

[Martin_Raska]

How did you do downgrade? If I try to do it, it tells me its not possible to go back to R80.20.40

Upgrade logs tells:

2022-Jul-18-10:05:19: Current version is R81_996000506_10_00, new image version is R80_992002665_20_40
2022-Jul-18-10:05:19: Comparing 80 81 20 10 40 00
2022-Jul-18-10:05:19: Upgrade to this version is not supported.

If I try revert image from GUI menu, it tells me system will revert to January 2022 with image R80.20.35 and changes will be lost?

Really?

[Softwhere]

For us it worked over the GUI, (revert to Previous Image). We checked before starting the status in Device > System Operations "current firmware version". But just in case we of course made a backup and downloaded the correct .img file so if all fails could go this route, (Manual Upgrade). In the past our worst case, factory defaults > .img installed > Config Backup restored,

Maybe this will help you.