Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Anaz
Explorer
Jump to solution

How do we create multiple DHCP scope exceptions in 1570 Appliance(R81.10)?

Hi All,

I am trying to create multiple DHCP scope exceptions for a particular network. Eg. I have a network 10.100.1.0/24 on which I need DHCP scope exceptions from 10.100.1.50-10.100.1.65 and 10.100.1.150-10.100.1.240.
How would I do this?

0 Kudos
1 Solution

Accepted Solutions
Chris_Atkinson
Employee Employee
Employee
5 Replies
Chris_Atkinson
Employee Employee
Employee

Have you tried the following CLI option without success?

https://sc1.checkpoint.com/documents/SMB_R81.10.X/CLI/EN/Content/Topics/add-address-range.htm 

CCSM R77/R80/ELITE
Anaz
Explorer

Hi Chris,

Thank you for sharing that.

Let me try the following commands. 

set interface "LAN1.11" ipv4-address "10.100.1.1" subnet-mask "255.255.255.0"
set dhcp server interface "LAN1.11" dns "auto"
set dhcp server interface "LAN1.11" lease-time "4"
set dhcp server interface "LAN1.11" include-ip-pool "10.100.1.1-10.100.1.254
add address-range name VLAN11 start-ipv4 10.100.1.50 end-ipv4 10.100.1.65 dhcp-exclude-ip-addr on
add address-range name VLAN11.1 start-ipv4 10.100.1.150 end-ipv4 10.100.1.246 dhcp-exclude-ip-addr on

Regards,

0 Kudos
G_W_Albrecht
Legend
Legend

And, does it work as expected now ?

CCSE CCTE CCSM SMB Specialist
0 Kudos
Anaz
Explorer

I tested it in Test Environment and found it to be working. I will be implementing it in Production next week.

0 Kudos
Anaz
Explorer

It works.

Thank you for the support.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events