Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Venkatesh
Participant

Checkpoint 1800 appliance WAN-B Port question

Hi Everyone,

Wanted understand, if i can use dual ISP in 1800 appliance - i see two WAN ports WAN and WAN-B, Can i use them as separate ISP connections.

In GUI i dont see WAN-B separate ISP config, its very confusing, couldnt find much documentation on WAN-B.

WAN and WAN-B ports

Two WAN ports each of which is a combo port of SFP and RJ45 (on the right).

Only one can operate a time once plugged in and connected.

RJ45 - supports 10/100/1000MbE.

SFP - supports 1000MbE

 

Thanks and Regards,

Venkatesh Patil

0 Kudos
10 Replies
Chris_Atkinson
Employee Employee
Employee

Multiple ISP links are supported (VLANs etc)

The physical WAN-B port is currently reserved for future use (refer notes in datasheet), although LAN ports can also be repurposed.

CCSM R77/R80/ELITE
G_W_Albrecht
Legend Legend
Legend

@_Val_  - can you put this to Spark ?

CCSP - CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
_Val_
Admin
Admin

Done 🙂

kristait
Contributor

It's been over three years since this post was made, yet the WAN-B port still unused.

Can anyone confirm whether support for WAN-B as a separate ISP interface is planned in upcoming releases, such as R82?

It would be helpful to understand the roadmap or intended use case for this port, especially in dual ISP configurations.

0 Kudos
PhoneBoy
Admin
Admin

Not heard anything specifically about this.
R82 for SMBs is planned for EA soon.

0 Kudos
G_W_Albrecht
Legend Legend
Legend

You can use the DMZ port for WAN2 to 2nd ISP.

The RJ45 port supports 10 / 100 MbE and 1 / 2.5 / 5 / 10 GbE.

The SFP port supports only 10 GbE.

CCSP - CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
kristait
Contributor

Yes, indeed we can use the DMZ port for WAN2, but I already have a separate public-facing DevLab environment configured on it, so it's not available for reuse at the moment.

I’m aware that a LAN port can be used for the second WAN, but we have multiple CCTV and LAN devices connected, and soon all 18 ports will be fully utilized.

If WAN-B can be enabled, it would be really helpful for managing the second ISP connection more efficiently.

0 Kudos
PhoneBoy
Admin
Admin

The "Future Support" of WAN-B is still listed here: https://support.checkpoint.com/results/sk/sk168880
Which means there is no mechanism to enable WAN-B currently.

0 Kudos
G_W_Albrecht
Legend Legend
Legend

So better do a trade-in for an appliance with more ports ! Future support for WAN-B can come or not, i would bet on nothing...

CCSP - CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
RS_Daniel
Advisor

Hi,

You can also use vlans on WAN interface to both ISP connections on the same interface.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    Tue 07 Oct 2025 @ 09:30 AM (CEST)

    CheckMates Live Denmark!
    CheckMates Events