Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Sanjay_S
Advisor

Checkpoint 1450 Upgrade

Hi All,

We are planning to upgrade the Checkpoint 1450 Firewall. However, i am not finding much details on the latest version and the way we upgrade it except the below SK.

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

Below is the current version running on the firewall.:

This is Check Point's 1450 Appliance R77.20.86 - Build 855
kernel: R77.20.86 - Build 775

If anyone can help me in the link which could suggest me the upgrade procedure and the latest version that will be helpful. As this is SMB embedded device never upgraded these firewalls before. And it is standalone box, so have to make sure all the steps are followed. Please suggest.

Regards,

Sanjay S

0 Kudos
4 Replies
G_W_Albrecht
Legend
Legend

Use show diag in CLISH to show the firmware version installed - fw1_sx_dep_R77_990173120_20.img would be the newest, seeLatest firmware builds for 77.20.xx SMB appliances ...

CCSE CCTE CCSM SMB Specialist
0 Kudos
jimm
Participant

A related question: Is it possible to upload the new image to the 1450 in preparation for the upgrade, without actually starting the upgrade process? If so, how?

0 Kudos
Chris_Atkinson
Employee Employee
Employee

Generally this isn't an issue / request we see as the upgrade files for SMB appliances are only ~160MB in size.

Mind you this is sort of how the "Manual Upgrade" process already works, you are prompted to proceed with the install(upgrade) phase after the image upload is complete and verified.

I expect if you left the appliance on this page for too long without proceeding however the admin/UI session would timeout in the browser in accordance with the default/configured settings (MAX 999 minutes) and I wouldn't rely on such an approach.

 

 

 

CCSM R77/R80/ELITE
0 Kudos
G_W_Albrecht
Legend
Legend

From https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...:

  • Copy the image to /storage  directory (using WinSCP)
  • Run (from Expert mode): upgrade_revert_image.sh /storage/%FILENAME% upgrade safe

See also here https://community.checkpoint.com/t5/SMB-Gateways-Spark/SMB-firmware-from-CLI/m-p/105622

CCSE CCTE CCSM SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events