Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
obsidian11
Contributor

Check Point Quantum Security Gateway 1530 - problem with remote access vpn

Greetings checkmates.

First of all, wishing you all happy New Year. May it be filled with good fortunes and opportunities for business.

My client have problem with this Check Point Quantum Security Gateway 1530 locally managed appliance (also connected to SMP). Remote access VPN suddenly stopped working. It uses default SSL VPN port - 443.

When I try to visit https://appliance-domain-example.ddns.net:443  (ddns normally working and pointing to correct IP), it doesnt event show SSL Network Extender (SNX) landing page, as is supposed to. Chrome shows error: ERR_CONNECTION_CLOSED.

I also tried changing that port to e.g. 8443 (and tick checkbox which allows port 443 to be reserved for port forwarding), but no luck.

Besides, when I do that, I even get this:

Error has occurred while applying the Network Objects settings (error 00362). If the problem persists, contact Check Point Technical Assistance Center

Any idea how can I fix this and establish Remote Access VPN again?Site to site VPN works just fine.

Thank you in advance.

0 Kudos
10 Replies
_Val_
Admin
Admin

Please look into sk175503

 

0 Kudos
obsidian11
Contributor

Thanks for reply,

it did solve issue with this error 00362 (at least, I think so).

However, problem with remote access vpn still exists. Any idea how to fix this?

It's just strange, suddenly stopped working..

0 Kudos
_Val_
Admin
Admin

Not without details. How is Mobile Access Blade configured? Centrally or locally managed appliance? Which software version? Please provide some screenshots also

 

0 Kudos
obsidian11
Contributor

As I said it's locally managed appliance (also connected to SMP).

Firmware version: R80.20.40 (992002691)

Settings are similar to SMB appliance 700 series (which works just fine). Everything is pretty much default.

I also think that there is no any server (or anything) that use port 443 (via NAT rule).

I've attached screenshots below.

0 Kudos
G_W_Albrecht
Legend
Legend

Please contact TAC to get help !

CCSE CCTE CCSM SMB Specialist
0 Kudos
PhoneBoy
Admin
Admin

It’s an SMB appliance, thus there is no MAB portal.
If a reboot doesn’t solve the issue, I recommend engaging with the TAC to assist.

0 Kudos
G_W_Albrecht
Legend
Legend

sk175503 is not available anymore!

CCSE CCTE CCSM SMB Specialist
0 Kudos
obsidian11
Contributor

Thanks for providing extra info.

My problem is resolved, it wasn't actually checkpoint, it was new GPON router, because router was set to route mode, instead to bridge. Port forwarding solved issue. Thanks everyone. 🙂

0 Kudos
carlosjunior1
Participant

Would you know if another SK will be published in place of this one?
I have error message 00362 and I need to fix it.
Thanks.

0 Kudos
PhoneBoy
Admin
Admin

The "solution" documented in the now hidden SK suggests disconnecting the device from SMP and reconnecting it.
If that doesn't apply, then I recommend a TAC case: https://help.checkpoint.com 


0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events