Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Daniel_A
Explorer

Remote VPN Isssue [during stress testing]

Dear All,

We have deployed remote VPN access, the remote VPN is stable and works fine. However, when we run a query for service stress testing with high traffic volume using the remote VPN, it immediately kicks out from the server. This is, therefore, to request your usual assistance in resolving the issue.

Regards, 

0 Kudos
5 Replies
PhoneBoy
Admin
Admin

Let's start with some basic information like:

  • Version/JHF of gateway
  • VPN client version
  • What precisely happens in a "service stress test"
  • What precisely do you mean by it "kicks out from the server"

Any other pertinent details would be helpful.

0 Kudos
Daniel_A
Explorer

We hope you are doing well. We really appreciate your prompt response.

  • Version/JHF of gateway

               Answer: 120

  • VPN client version

              Answer:  We are currently using SNX.

  • What precisely happens in a "service stress test"

              Answer: Currently, system developers use a remote VPN connection to stress test newly   

              developed applications. Previously, such testing was done on-site.

  • What precisely do you mean by it "kicks out from the server"

              Answer: We've noticed that when a system tester runs a query, it is likely to be quite expensive in terms of network traffic. In this case, the tester will immediately be disconnected from the RDP, but the remote VPN will still be running.

Questions:

Is it possible to use a remote VPN for high-volume file transfers?

0 Kudos
G_W_Albrecht
Legend
Legend

  • Version/JHF of gateway

               Answer: 120

This is no CheckPoint version / JHF ! Any RA or S2S VPN connection is throttled, to get the full speed you have to use more than one process / connection at a time. But why do such app stress tests over VPN ? Never encountered that. Sounds like you stress your RDP connection only... With what error message the connection stops ?

CCSE CCTE CCSM SMB Specialist
0 Kudos
PhoneBoy
Admin
Admin

"120" is not a valid version, it should be something of the form Rxx.yy JHF Take zz.
You can obtain this information using the CLI command cpinfo -y all.

Note that SNX uses Visitor Mode and, in earlier releases, the number of connections supported is limited.
See: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut... 
If you're on R81 or above and you can consistently reproduce this issue, I recommend opening a TAC case.

0 Kudos
Chris_Atkinson
Employee Employee
Employee

R80.40 JHF T120 (August 2021), what hardware model and how is the load on the Gateway itself during the test ?

The following could be relevant:

sk87760 - SNX fails during large file transfers

CCSM R77/R80/ELITE
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events