Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Nick_Doropoulos
Advisor

fw ctl engine

I was just wondering if anybody has used the fw ctl engine command at all. Apart from CLI ref guides, I've never seen it being used or referred to by any sks.

Many thanks in advance.

5 Replies
HeikoAnkenbrand
Champion Champion
Champion

It's not a r80.20 or  r80.30 gateway or management CLI command!

➜ CCSM Elite, CCME, CCTE
Timothy_Hall
Champion
Champion

Never heard of that command, unless you are somehow referring to the INSPECT engine/driver which handles traffic in the PXL and F2F paths in R80.10 and earlier?

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
PhoneBoy
Admin
Admin

Well, that's a new one on me.

I did find a reference to in the R77 CLI Guide, but the help there looks completely different from what I see when I execute it on R80.20 and on SMB.
HeikoAnkenbrand
Champion Champion
Champion

I have tested it under  R80.20 and R80.30EA. The CLI command does not exist on gateway and management.

Regards 

Heiko

➜ CCSM Elite, CCME, CCTE
HeikoAnkenbrand
Champion Champion
Champion

Something funny.

We can build us a new CLI command.

Smiley LOLSmiley LOLSmiley LOL

# echo cpstart > /usr/bin/fw_ctl_engine_on

# chmod 770 /usr/bin/fw_ctl_engine_on

# echo cpstop > /usr/bin/fw_ctl_engine_off

# chmod 777 /usr/bin/fw_ctl_engine_off

Now we can start/stop the Check Point firewall with "fw_ctl_engine_on" and "fw_ctl_engine_off"

➜ CCSM Elite, CCME, CCTE

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events