Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Dyslexic155
Participant

Management server unable to connect to internet

Hello Experts,

 

Our issue is the management server is now not connected to the internet, below is the setup and we experienced the issue after adding the 2nd cluster at the left.

 

Ping and trace to both clusters works, but traffic to internet doesn't.

 

Any thoughts? something needs to be tweaked on the SMS? or the added cluster should be reviewed?

 

Best Regards,

0 Kudos
2 Replies
Chris_Atkinson
Employee Employee
Employee

 

You'd need to step through this logically to isolate the cause, first how's the NAT defined and is there any corresponding drop logs for the traffic?

 

 

CCSM R77/R80/ELITE
0 Kudos
Timothy_Hall
Champion
Champion

If you can reach both clusters but not go through them, and assuming that the traffic is being allowed by the Firewall Policy on both,  either you have a NAT configuration issue or possibly some kind of routing problem involving the NAT addresses you are trying to use.  You'll need a packet capture on the clusters to see exactly what is going on, as the Check Point traffic logs will gladly show you exactly how traffic is being allowed and NATed, but those same logs are not really designed to reveal routing problems.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events