ISP Redundancy (command fw isp_link)

[crenatovb]

Hello friends,

I configured ISP redundancy and ran tests with the command fw isp_link.
The tests indicate the proper functioning of the ISP Redundancy settings.
However, when I disconnect the router interface that connects a link in CheckPoint, failover does not occur.

Below, the tests:

In the execution of the tests the ping is not interrupted.

The tracert changes the path according to the default route.

When accessing the router and performing a shutdown on the interface (as indicated below).
The route is also changed at the gateway, however the ping stops and does not return.

Ping is for the host that is after the gateway.

What would be the difference between the command and the switch on the router interface?

Thanks a lot for the help!

[crenatovb]

Below is the interface that performed a shutdown.


















Thanks!