Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Maik1
Contributor
Jump to solution

Using Datacenter Objects. Rules do not match

I would like to use Datacenter objects. I have set up a connection to our Vcenter. The connection is shown as "connected" and I can also impot objects and use them in rules. The problem is that the rules do not match. I don't understand why. Does Cloud Guard need to be enabled for this perhaps? As I understand it, all you have to do is connect to a Vcenter and you can use the objects. The mgmt is running R81 and the gateway is running R80.30.

0 Kudos
1 Solution

Accepted Solutions
Chris_Atkinson
Employee Employee
Employee

Is "Identity Awareness" and the "Identity Web API" enabled on the gateway?

 

Refer: https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_CloudGuard_Controller_AdminGuide/T...

CCSM R77/R80/ELITE

View solution in original post

2 Replies
Chris_Atkinson
Employee Employee
Employee

Is "Identity Awareness" and the "Identity Web API" enabled on the gateway?

 

Refer: https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_CloudGuard_Controller_AdminGuide/T...

CCSM R77/R80/ELITE
Maik1
Contributor

Yes, that solves the problem. Tank you very much!

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.