AnsweredAssumed Answered

Cannot establish C2S VPN connection

Question asked by Jozko Mrkvicka on Sep 5, 2018
Latest reply on Sep 12, 2018 by Jozko Mrkvicka

Hello guys,

 

I am in the middle of creation my own LAB where I need to establish VPN from Check Point SecuRemote towards my test cluster.

The issue is that I have deployed new management server (SMS) only for this purpose and till now 1 gateway which is part of cluster (second member is not yet).

I am building my LAB as VMs. Both VMs were recently installed therefore evaluation lics are in place:

I had setup all needed options to get Remote Access VPN work, but unfortunately I cannot establish VPN connection from my desktop towards cluster IP (192.168.135.100).

 

Some facts which are worth to mention:

1. Both VMs are R77.30 

2. I am running LAB on Windows 8.1 Pro

3. I am using Check Point VPN client version E80.85 Build 986008506

4. Site can be created, but connection using Username and Password is not possible. Following screen is visible after entered correct username and password:

5. Visitor mode has been enabled.

 

I also tried to do tcpdumps, enable vpn debugs, capture traffic using Wireshark, add exceptions to the ESET firewall (installed on Windows), collect logs from SecuRemote.... but to be honest, I dont see any indication what could be wrong...

 

So in case someone has some suggestion how to properly debug this issue, let me know and I will provide needed outputs.

 

Thanks for every comment.

Outcomes