S2S VPN over the Internet. Using public ip addresses as peer addresses. If my Check Point R80.10 gateway external ip address is a private address for BGP peering, can I terminate a S2S VPN on the gateway by using a public ip Static NAT configured on the same gateway? It's quite common to see scenarios where there is a Public<=translates to=>Private NAT device in front of the VPN peer, but does it work if the Check Point VPN peer also does the NAT required as well?
(Check Point R80.10 cluster Private IP<=translate to=>Public NAT) <=VPN connects to => Remote VPN Peer Public IP