Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
David_Chau
Contributor

Enabling Traffic Connections for the Smartview Monitor blade

Will enabling the Traffic Connections for the Smartview Monitor blade have an affect on CPU and memory resources?  If so, what is the impact?

2 Replies
Gomboragchaa
Advisor

I think it doesn't affect on performance. Maybe very little impact for management server resource. 

It is only shows resource usage.

Timothy_Hall
Champion
Champion

Had someone ask me the exact same question in a private email after reading my book, here is their original question and my answer:


>Regarding using the Monitoring Blade for "streamlined firewall performance troubleshooting". Do you recommend to enable all 3 check boxes (CP system counters, traffic connections and traffic throughput)? A note in the configuration page says "traffic history reports may have performance implications". Are there any recommendations to avoid those?
>

Yep definitely enable all these. What this actually does is load a
separate kernel driver on the firewall called rtm to gather and record
the extra statistics. Perhaps in the old days prior to CoreXL and the
speedy cores/memory we enjoy now, the performance impact would be
noticeable. I haven't noticed any kind of performance/acceleration
degradation by enabling all these checkboxes for many many years, and I

think this ominous-sounding warning is just legacy now.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events